MLABlibrarysvnkaklikMLAB_E8magsvn

Català-Valencià – Catalan中文 – Chinese (Simplified)中文 – Chinese (Traditional)Česky – CzechDansk – DanishNederlands – DutchEnglish – EnglishSuomi – FinnishFrançais – FrenchDeutsch – Germanעברית – Hebrewहिंदी – HindiMagyar – HungarianBahasa Indonesia – IndonesianItaliano – Italian日本語 – Japanese한국어 – KoreanМакедонски – Macedonianमराठी – MarathiNorsk – NorwegianPolski – PolishPortuguês – PortuguesePortuguês – Portuguese (Brazil)Русский – RussianSlovenčina – SlovakSlovenščina – SlovenianEspañol – SpanishSvenska – SwedishTürkçe – TurkishУкраїнська – UkrainianOëzbekcha – Uzbek

Compare Revisions

• This comparison shows the changes necessary to convert path

  → /schemata/Session.log @ 5

  → /schemata/Session.log @ 6

  ↔ Reverse comparison

• Compare Path:	Rev

  With Path:	Rev

Ignore whitespace Rev 5 → Rev 6

/schemata/Session.log
0,0 → 1,834
`<000>
-----------------
Loading PCB file 'D:\KAKLIK\schemata\default_blz1.pcb'...
PCB file loaded -- `DESIGN[D:\KAKLIK\schemata\default_blz1.pcb][D:\KAKLIK\schemata\default_blz1.pcb] -- version 2005.0
Integrity Test in progress...
No database integrity problems found
... Integrity test report saved -- `FILE[D:\KAKLIK\schemata\TestIntegrity.txt][D:\KAKLIK\schemata\TestIntegrity.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 39 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:02 (+00:00:02)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:07 (+00:00:05)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:07
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:05 (+00:00:04)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 4 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:05 (+00:00:04)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 18(+0) Inches Duration 00:00:05 (+00:00:04)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 7 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:06 (+00:00:05)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 9 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(-0) Inches Duration 00:00:05 (+00:00:04)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:04 (+00:00:04)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:04
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 3 Total 38 of 39 (97.4%) Vias 0 Duration 00:00:02 (+00:00:02)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 16(-0) Inches Duration 00:00:08 (+00:00:06)
-----------------
Done> Unroutes 1 Routed 38 of 39 (97.4%) Vias 0 Duration 00:00:08
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 38 of 39 (97.4%) Vias 0 Duration 00:00:01 (+00:00:01)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 16(+0) Inches Duration 00:00:05 (+00:00:04)
-----------------
Done> Unroutes 1 Routed 38 of 39 (97.4%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
Pre-routing analysis finished.
Route All Nets: Routed 2 Total 38 of 39 (97.4%) Vias 0 Duration 00:00:01 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:01 (+00:00:00)
-----------------
Done> Unroutes 1 Routed 38 of 39 (97.4%) Vias 0 Duration 00:00:01
-----------------
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 1 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:16 (+00:00:15)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:16
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
Pre-routing analysis finished.
Route All Nets: Routed 2 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:01 (+00:00:00)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:01
-----------------
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(-0) Inches Duration 00:00:07 (+00:00:07)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:07
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
Pre-routing analysis finished.
Route All Nets: Routed 3 Total 38 of 39 (97.4%) Vias 0 Duration 00:00:02 (+00:00:02)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:02 (+00:00:00)
-----------------
Done> Unroutes 1 Routed 38 of 39 (97.4%) Vias 0 Duration 00:00:02
-----------------
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 38 of 39 (97.4%) Vias 0 Duration 00:00:01 (+00:00:01)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:04 (+00:00:03)
-----------------
Done> Unroutes 1 Routed 38 of 39 (97.4%) Vias 0 Duration 00:00:04
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
Pre-routing analysis finished.
Route All Nets: Routed 2 Total 38 of 39 (97.4%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:00 (+00:00:00)
-----------------
Done> Unroutes 1 Routed 38 of 39 (97.4%) Vias 0 Duration 00:00:00
-----------------
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 38 of 39 (97.4%) Vias 0 Duration 00:00:01 (+00:00:01)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(-0) Inches Duration 00:00:04 (+00:00:03)
-----------------
Done> Unroutes 1 Routed 38 of 39 (97.4%) Vias 0 Duration 00:00:04
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
Pre-routing analysis finished.
Route All Nets: Routed 2 Total 38 of 39 (97.4%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:01 (+00:00:00)
-----------------
Done> Unroutes 1 Routed 38 of 39 (97.4%) Vias 0 Duration 00:00:01
-----------------
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 1 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 19(-1) Inches Duration 00:00:05 (+00:00:04)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 19(+0) Inches Duration 00:00:04 (+00:00:03)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:04
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 11 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(-0) Inches Duration 00:00:05 (+00:00:04)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:05 (+00:00:04)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:05 (+00:00:04)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:05 (+00:00:04)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Saving PCB file 'D:\KAKLIK\@dokumenty\skola\SPSSE\E2B\praxe\lampickaLED\default_blz1.pcb'...
PCB file saved -- `DESIGN[D:\KAKLIK\@dokumenty\skola\SPSSE\E2B\praxe\lampickaLED\default_blz1.pcb][D:\KAKLIK\@dokumenty\skola\SPSSE\E2B\praxe\lampickaLED\default_blz1.pcb]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 4 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:05 (+00:00:04)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:05 (+00:00:04)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 37 of 39 (94.9%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 16(+0) Inches Duration 00:00:00 (+00:00:00)
-----------------
Done> Unroutes 2 Routed 37 of 39 (94.9%) Vias 0 Duration 00:00:00
-----------------
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 2 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(-0) Inches Duration 00:00:05 (+00:00:04)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:05 (+00:00:04)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 6 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:01)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:04 (+00:00:02)
-----------------
User stop> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:04
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:03 (+00:00:03)
-----------------
User stop> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:04
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
Protect in progress...
...Protect finished.
Unprotect in progress...
...Unprotect finished.
Unroute in progress...
...Unroute finished.
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 39 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:03 (+00:00:02)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:08 (+00:00:05)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:08
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 3 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:01)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 18(+0) Inches Duration 00:00:08 (+00:00:07)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:08
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 18(+0) Inches Duration 00:00:06 (+00:00:06)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
Pre-routing analysis finished.
Route All Nets: Routed 2 Total 35 of 39 (89.7%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 15(+0) Inches Duration 00:00:00 (+00:00:00)
-----------------
Done> Unroutes 4 Routed 35 of 39 (89.7%) Vias 0 Duration 00:00:01
-----------------
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 4 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:01)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:04 (+00:00:03)
-----------------
User stop> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:04
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 7 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:01)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:07 (+00:00:06)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:07
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 18(+0) Inches Duration 00:00:06 (+00:00:06)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 18(+0) Inches Duration 00:00:06 (+00:00:06)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 10 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(-0) Inches Duration 00:00:06 (+00:00:06)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:06 (+00:00:05)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 2 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:06 (+00:00:05)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
Unroute in progress...
...Unroute finished.
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
Pre-routing analysis finished.
Route All Nets: Routed 10 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:01)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(-0) Inches Duration 00:00:02 (+00:00:01)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:03
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:04 (+00:00:04)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
Unroute in progress...
...Unroute finished.
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 4 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:01)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 19(-0) Inches Duration 00:00:07 (+00:00:05)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:07
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 19(+0) Inches Duration 00:00:05 (+00:00:05)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 3 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 19(+0) Inches Duration 00:00:05 (+00:00:05)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 19(+0) Inches Duration 00:00:05 (+00:00:05)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 5 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 19(-0) Inches Duration 00:00:06 (+00:00:05)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Batch Router Statistics
Pre-routing analysis in progress...
`<001>
Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box.
`<000>
Pre-routing analysis finished.
Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00)
-----------------
Optimize All Nets: Vias 0(+0) Trace length 19(+0) Inches Duration 00:00:05 (+00:00:05)
-----------------
Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05
-----------------
Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt]
-----------------
Saving PCB file 'D:\KAKLIK\@dokumenty\skola\SPSSE\E2B\praxe\lampickaLED\default_blz1.pcb'...
PCB file saved -- `DESIGN[D:\KAKLIK\@dokumenty\skola\SPSSE\E2B\praxe\lampickaLED\default_blz1.pcb][D:\KAKLIK\@dokumenty\skola\SPSSE\E2B\praxe\lampickaLED\default_blz1.pcb]