Subversion Repositories svnkaklik

Compare Revisions

Regard whitespace Rev 882 → Rev 1068

/programy/C/PIC/mereni/geiger/geiger.BAK
1,19 → 1,27
#include <16F88.h>
#device adc=8
#include "geiger.h"
 
#FUSES NOWDT //No Watch Dog Timer
#FUSES HS //High speed Osc (> 4mhz)
#FUSES NOPUT //No Power Up Timer
#FUSES MCLR //Master Clear pin enabled
#FUSES NOBROWNOUT //No brownout reset
#FUSES NOLVP //No low voltage prgming, B3(PIC16) or B5(PIC18) used for I/O
#FUSES NOCPD //No EE protection
#FUSES NOWRT //Program memory not write protected
#FUSES NODEBUG //No Debug mode for ICD
#FUSES NOPROTECT //Code not protected from reading
#FUSES NOFCMEN //Fail-safe clock monitor disabled
#FUSES NOIESO //Internal External Switch Over mode enabled
 
#use delay(clock=20000000)
#use rs232(baud=9600,parity=N,xmit=PIN_B3,rcv=PIN_B5,bits=8)
void main()
{
unsigned int16 n;
 
setup_adc_ports(NO_ANALOGS|VSS_VDD);
setup_adc(ADC_OFF);
setup_spi(FALSE);
setup_timer_0(RTCC_EXT_H_TO_L|RTCC_DIV_1);
setup_timer_1(T1_DISABLED|T1_DIV_BY_1);
setup_timer_2(T2_DISABLED,0,1);
setup_ccp1(CCP_OFF);
setup_comparator(A0_A2_A1_A2_OUT_ON_A3_A4);
setup_vref(VREF_LOW|1|VREF_A2);
setup_oscillator(False);
n=0;
set_timer0(0);
While(true)
{
printf("%Lu0, %u\n\r", n++, get_timer0());
set_timer0(0);
Delay_ms(10000);
}
}
/programy/C/PIC/mereni/geiger/geiger.c
1,6 → 1,12
#include "D:\KAKLIK\programy\PIC_C\mereni\geiger\geiger.h"
#include "geiger.h"
 
#int_EXT
void EXT_isr(void)
{
output_toggle(LED3);
}
 
 
void main()
{
unsigned int16 n;
16,6 → 22,10
setup_vref(VREF_LOW|1|VREF_A2);
setup_oscillator(False);
enable_interrupts(INT_EXT);
enable_interrupts(GLOBAL);
n=0;
set_timer0(0);
While(true)