No changes between revisions
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/.cvsignore
0,0 → 1,0
*~ *.o i2c_usb
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/Makefile
0,0 → 1,21
#
# Makefile
#
 
APP = i2c_usb
 
all: $(APP)
 
clean:
rm -f $(APP)
 
$(APP): $(APP).c
$(CC) -o $@ $(APP).c `pkg-config gtk+-2.0 hildon-1 --cflags --libs` -lusb
 
install:
install $(APP) $(DESTDIR)/usr/bin
install i2c_tiny_usb.rules $(DESTDIR)/etc/udev/rules.d
install i2c_tiny_usb.desktop $(DESTDIR)/usr/share/applications/hildon
install i2c.26.png $(DESTDIR)/usr/share/icons/hicolor/26x26/hildon/i2c_tiny_usb.png
install i2c.40.png $(DESTDIR)/usr/share/icons/hicolor/40x40/hildon/i2c_tiny_usb.png
install i2c.64.png $(DESTDIR)/usr/share/icons/hicolor/scalable/hildon/i2c_tiny_usb.png
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/debian/changelog
0,0 → 1,10
i2c-tiny-usb (0.2) unstable; urgency=low
 
* Initial release (Closes: #nnnn) <nnnn is the bug number of your ITP>
 
-- Till Harbaum <Till@Harbaum.org> Tue, 25 Dec 2007 21:02:30 +0100
 
* First hildonized version
 
-- Till Harbaum <Till@Harbaum.org> Sat, 29 Dec 2007 12:06:43 +0100
 
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/debian/compat
0,0 → 1,0
5
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/debian/control
0,0 → 1,26
Source: i2c-tiny-usb
Section: user/other
Priority: extra
Maintainer: Till Harbaum <Till@Harbaum.org>
Build-Depends: debhelper (>= 5), libgtk2.0-dev, libusb-dev, libhildon1-dev
Standards-Version: 3.7.2
 
Package: i2c-tiny-usb
Architecture: any
Depends: ${shlibs:Depends}, hildon-desktop
Description: User space application for i2c_tiny_usb
This simple test application for the i2c-tiny-usb interface bypasses
the kernel driver being part of the kernel since 2.6.21. The kernel
driver may therefore have to be unloaded before this i2c_usb is being
run. This program currently supports the ds1621 temperature sensor
and the pcf8574 parallel port. See www.harbaum.org/till/i2c_tiny_usb
for details.
XB-Maemo-Icon-26:
iVBORw0KGgoAAAANSUhEUgAAABoAAAAaCAYAAACpSkzOAAAAF3RFWHRTb2Z0d2Fy
ZQBYUGFpbnQgMi43LjguMT1iBU0AAAD2SURBVEiJvZZLDoQgDIbLZE7nBk5hz9Rb
4MbrdRamhkcp4qB/YhQK/UptAMfMAACAiMfHZBGRAwBwzAyIyMuyPMGBfd+BiJxb
19WEeO+z9rZtt2Bfa4D3vnKs9V3RxzLecdiSY6mGBsBKXWlrCRGP1LUmW2kaSSER
2f+oBIvupNQEjTq0VmkWwygkfZfqpu4faKppK+rpNdAjqdN2k2krEuePV50FmQ6y
1N3rLI3sdd3zaIay8yiEoA6KMWZ2aWt9mg+xVeVdOgohZH0taYGkqkBlVFcgMk4C
0+ZWVRdjPB8N3IO15l5ekRZxarf+D8Cb1623LpA/+pCiKqwn6CcAAAAASUVORK5C
YII=
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/debian/copyright
0,0 → 1,13
This package was debianized by Till Harbaum <Till@Harbaum.org> on
Tue, 25 Dec 2007 21:02:30 +0100.
 
Copyright:
 
<Copyright (C) 2007 Till Harbaum>
 
License:
 
<GPL>
 
The Debian packaging is (C) 2007, Till Harbaum <Till@Harbaum.org> and
is licensed under the GPL, see `/usr/share/common-licenses/GPL'.
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/debian/dirs
0,0 → 1,7
usr/bin
usr/sbin
etc/udev/rules.d
usr/share/applications/hildon
usr/share/icons/hicolor/26x26/hildon
usr/share/icons/hicolor/40x40/hildon
usr/share/icons/hicolor/scalable/hildon
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/debian/docs
0,0 → 1,2
readme.txt
readme.txt
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/debian/postinst
0,0 → 1,8
#! /bin/sh
 
# The clock might be wrong and we know that we need to update the icon
# cache so we just force it.
 
gtk-update-icon-cache -f /usr/share/icons/hicolor
 
exit 0
Property changes:
Added: svn:executable
+*
\ No newline at end of property
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/debian/rules
0,0 → 1,98
#!/usr/bin/make -f
# -*- makefile -*-
# Sample debian/rules that uses debhelper.
# This file was originally written by Joey Hess and Craig Small.
# As a special exception, when this file is copied by dh-make into a
# dh-make output file, you may use that output file without restriction.
# This special exception was added by Craig Small in version 0.37 of dh-make.
 
# Uncomment this to turn on verbose mode.
#export DH_VERBOSE=1
 
 
 
 
CFLAGS = -Wall -g
 
ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
CFLAGS += -O0
else
CFLAGS += -O2
endif
 
configure: configure-stamp
configure-stamp:
dh_testdir
# Add here commands to configure the package.
 
touch configure-stamp
 
 
build: build-stamp
 
build-stamp: configure-stamp
dh_testdir
 
# Add here commands to compile the package.
$(MAKE)
#docbook-to-man debian/i2c-tiny-usb.sgml > i2c-tiny-usb.1
 
touch $@
 
clean:
dh_testdir
dh_testroot
rm -f build-stamp configure-stamp
 
# Add here commands to clean up after the build process.
-$(MAKE) clean
 
dh_clean
 
install: build
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
 
# Add here commands to install the package into debian/i2c-tiny-usb.
$(MAKE) DESTDIR=$(CURDIR)/debian/i2c-tiny-usb install
 
 
# Build architecture-independent files here.
binary-indep: build install
# We have nothing to do by default.
 
# Build architecture-dependent files here.
binary-arch: build install
dh_testdir
dh_testroot
dh_installchangelogs
dh_installdocs
dh_installexamples
# dh_install
# dh_installmenu
# dh_installdebconf
# dh_installlogrotate
# dh_installemacsen
# dh_installpam
# dh_installmime
# dh_python
# dh_installinit
# dh_installcron
# dh_installinfo
dh_installman
dh_link
dh_strip
dh_compress
dh_fixperms
# dh_perl
# dh_makeshlibs
dh_installdeb
dh_shlibdeps
dh_gencontrol
dh_md5sums
dh_builddeb
 
binary: binary-indep binary-arch
.PHONY: build clean binary-indep binary-arch binary install configure
Property changes:
Added: svn:executable
+*
\ No newline at end of property
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/i2c.26.png
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Property changes:
Added: svn:mime-type
+application/octet-stream
\ No newline at end of property
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/i2c.40.png
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Property changes:
Added: svn:mime-type
+application/octet-stream
\ No newline at end of property
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/i2c.64.png
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Property changes:
Added: svn:mime-type
+application/octet-stream
\ No newline at end of property
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/i2c_tiny_usb.desktop
0,0 → 1,7
[Desktop Entry]
Encoding=UTF-8
Version=1.0
Type=Application
Name=I²C-Tiny-USB Demo
Icon=i2c_tiny_usb
Exec=/usr/bin/i2c_usb
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/i2c_tiny_usb.rules
0,0 → 1,2
# give user access to i2c-tiny-usb
BUS=="usb", ACTION=="add", SUBSYSTEM=="usb_device", SYSFS{idVendor}=="0403", SYSFS{idProduct}=="c631", GROUP="users", OWNER="user"
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/i2c_usb.c
0,0 → 1,513
/*
* i2c_usb.c - test application for the i2c-tiny-usb interface
* http://www.harbaum.org/till/i2c_tiny_usb
*
*
*/
 
// #define NO_USB
 
/* Includes */
#include <hildon/hildon-program.h>
 
#include <gtk/gtkmain.h>
#include <gtk/gtklabel.h>
 
#include <glib.h>
#include <errno.h>
 
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <usb.h>
 
/* ds1621 chip address (A0-A2 tied low) */
#define DS1621_ADDR 0x48
 
/* pcf8574 chip address (A0-A2 tied low) */
#define PCF8574_ADDR 0x20
 
#define LOOPS 100
 
#define USB_CTRL_IN (USB_TYPE_CLASS | USB_ENDPOINT_IN)
#define USB_CTRL_OUT (USB_TYPE_CLASS)
 
/* the vendor and product id was donated by ftdi ... many thanks!*/
#define I2C_TINY_USB_VID 0x0403
#define I2C_TINY_USB_PID 0xc631
 
#define I2C_M_RD 0x01
 
/* commands via USB, must e.g. match command ids firmware */
#define CMD_ECHO 0
#define CMD_GET_FUNC 1
#define CMD_SET_DELAY 2
#define CMD_GET_STATUS 3
#define CMD_I2C_IO 4
#define CMD_I2C_BEGIN 1 // flag to I2C_IO
#define CMD_I2C_END 2 // flag to I2C_IO
 
#define STATUS_IDLE 0
#define STATUS_ADDRESS_ACK 1
#define STATUS_ADDRESS_NAK 2
 
usb_dev_handle *handle = NULL;
gboolean pcf8574_present = 0;
gboolean ds1621_present = 0;
 
/* global reference to main window */
HildonWindow *window;
void error(char *msg, char *parm);
 
/* write a set of bytes to the i2c_tiny_usb device */
int i2c_tiny_usb_write(int request, int value, int index) {
if(usb_control_msg(handle, USB_CTRL_OUT, request,
value, index, NULL, 0, 1000) < 0) {
error("USB error: %s", usb_strerror());
return -1;
}
return 1;
}
 
/* read a set of bytes from the i2c_tiny_usb device */
int i2c_tiny_usb_read(unsigned char cmd, void *data, int len) {
int nBytes;
 
/* send control request and accept return value */
nBytes = usb_control_msg(handle,
USB_CTRL_IN,
cmd, 0, 0, data, len, 1000);
 
if(nBytes < 0) {
error("USB error: %s", usb_strerror());
return nBytes;
}
 
return 0;
}
 
/* get i2c usb interface firmware version */
void i2c_tiny_usb_get_func(GtkWidget *vbox) {
unsigned long func;
if(i2c_tiny_usb_read(CMD_GET_FUNC, &func, sizeof(func)) == 0) {
char str[64];
 
sprintf(str, "Functionality = %lx\n", func);
gtk_box_pack_start(GTK_BOX(vbox), gtk_label_new(str), FALSE, FALSE, 0);
} else
gtk_box_pack_start(GTK_BOX(vbox),
gtk_label_new("Unable to read functionality"),
FALSE, FALSE, 0);
}
 
/* set a value in the I2C_USB interface */
void i2c_tiny_usb_set(unsigned char cmd, int value) {
if(usb_control_msg(handle,
USB_TYPE_VENDOR, cmd, value, 0,
NULL, 0, 1000) < 0) {
error("USB error: %s", usb_strerror());
}
}
 
/* get the current transaction status from the i2c_tiny_usb interface */
int i2c_tiny_usb_get_status(void) {
int i;
unsigned char status;
if((i=i2c_tiny_usb_read(CMD_GET_STATUS, &status, sizeof(status))) < 0) {
error("Error reading status", NULL);
return i;
}
 
return status;
}
 
/* write command and read an 8 or 16 bit value from the given chip */
int i2c_read_with_cmd(unsigned char addr, char cmd, int length) {
unsigned char result[2];
 
if((length < 0) || (length > sizeof(result))) {
error("Request exceeds buffer size", NULL);
return -1;
}
 
/* write one byte register address to chip */
if(usb_control_msg(handle, USB_CTRL_OUT,
CMD_I2C_IO + CMD_I2C_BEGIN
+ ((!length)?CMD_I2C_END:0),
0, addr, &cmd, 1,
1000) < 1) {
error("USB error: %s", usb_strerror());
return -1;
}
 
if(i2c_tiny_usb_get_status() != STATUS_ADDRESS_ACK) {
error("Write command status failed!", NULL);
return -1;
}
 
// just a test? return ok
if(!length) return 0;
 
if(usb_control_msg(handle,
USB_CTRL_IN,
CMD_I2C_IO + CMD_I2C_END,
I2C_M_RD, addr, (char*)result, length,
1000) < 1) {
error("USB error: %s", usb_strerror());
return -1;
}
 
if(i2c_tiny_usb_get_status() != STATUS_ADDRESS_ACK) {
error("read data status failed", NULL);
return -1;
}
 
// return 16 bit result
if(length == 2)
return 256*result[0] + result[1];
 
// return 8 bit result
return result[0];
}
 
/* write a single byte to the i2c client */
int i2c_write_byte(unsigned char addr, char data) {
 
/* write one byte register address to chip */
if(usb_control_msg(handle, USB_CTRL_OUT,
CMD_I2C_IO + CMD_I2C_BEGIN + CMD_I2C_END,
0, addr, &data, 1,
1000) < 1) {
error("USB error: %s", usb_strerror());
return -1;
}
 
if(i2c_tiny_usb_get_status() != STATUS_ADDRESS_ACK) {
error("Write command status failed", NULL);
return -1;
}
 
return 0;
}
 
/* write a command byte and a single byte to the i2c client */
int i2c_write_cmd_and_byte(unsigned char addr, char cmd, char data) {
char msg[2];
 
msg[0] = cmd;
msg[1] = data;
 
/* write one byte register address to chip */
if(usb_control_msg(handle, USB_CTRL_OUT,
CMD_I2C_IO + CMD_I2C_BEGIN + CMD_I2C_END,
0, addr, msg, 2,
1000) < 1) {
error("USB error: %s", usb_strerror());
return -1;
}
 
if(i2c_tiny_usb_get_status() != STATUS_ADDRESS_ACK) {
error("Write command status failed", NULL);
return -1;
}
 
return 0;
}
 
/* write a command byte and a 16 bit value to the i2c client */
int i2c_write_cmd_and_word(unsigned char addr, char cmd, int data) {
char msg[3];
 
msg[0] = cmd;
msg[1] = data >> 8;
msg[2] = data & 0xff;
 
/* write one byte register address to chip */
if(usb_control_msg(handle, USB_CTRL_OUT,
CMD_I2C_IO + CMD_I2C_BEGIN + CMD_I2C_END,
0, addr, msg, 3,
1000) < 1) {
error("USB error: %s", usb_strerror());
return -1;
}
 
if(i2c_tiny_usb_get_status() != STATUS_ADDRESS_ACK) {
error("Write command status failed", NULL);
return -1;
}
 
return 0;
}
 
/* read ds1621 control register */
void ds1621_read_control(void) {
int result;
 
do {
result = i2c_read_with_cmd(DS1621_ADDR, 0xac, 1);
} while(!(result & 0x80));
}
 
/************************** GUI related code ************************/
 
static void
button_clicked (GtkButton* button, gpointer data) {
GtkWidget **checkBits = (GtkWidget**)data;
int i, value = 0;
 
for(i=0;i<8;i++) {
value <<= 1;
 
if(GTK_WIDGET_STATE(checkBits[i]))
value |= 1;
}
 
#ifndef NO_USB
if(pcf8574_present)
i2c_write_byte(PCF8574_ADDR, value);
#endif
}
 
static gboolean
update_temperature(gpointer data) {
GtkLabel *label = (GtkLabel*)data;
char str[32];
int temp, counter, slope;
 
/* just write command 0xee to start conversion */
if(i2c_read_with_cmd(DS1621_ADDR, 0xee, 0) < 0)
return 0;
ds1621_read_control();
temp = i2c_read_with_cmd(DS1621_ADDR, 0xaa, 2);
if(temp < 0) return 0;
/* read counter and slope values */
counter = i2c_read_with_cmd(DS1621_ADDR, 0xa8, 1);
slope = i2c_read_with_cmd(DS1621_ADDR, 0xa9, 1);
/* use counter and slope to adjust temperature (see ds1621 datasheet) */
temp = (temp & 0xff00) - 256/4;
temp += 256 * (slope - counter) / slope;
sprintf(str, "%d.%03d °C", temp>>8, 1000 * (temp & 0xff) / 256);
gtk_label_set_text(label, str);
 
return 1;
}
 
void error(char *msg, char *parm) {
GtkWidget *dialog;
 
dialog = gtk_message_dialog_new(GTK_WINDOW(window),
GTK_DIALOG_DESTROY_WITH_PARENT,
GTK_MESSAGE_ERROR,
GTK_BUTTONS_CLOSE,
msg, parm);
gtk_dialog_run(GTK_DIALOG(dialog));
gtk_widget_destroy(dialog);
}
 
int main(int argc, char *argv[]) {
/* Create needed variables */
HildonProgram *program;
int i;
 
/* pcf8574 parallel port interface */
GtkWidget *vbox;
GtkWidget *ds1621Frame;
GtkWidget *tempLabel;
GtkWidget *pcf8574Frame;
GtkWidget *hbox, *buttonBox;
GtkWidget *checkBits[8];
GSource *temp_timer_src;
 
struct usb_bus *bus;
struct usb_device *dev;
int ret;
/* Initialize the GTK. */
gtk_init(&argc, &argv);
/* Create the hildon program and setup the title */
program = HILDON_PROGRAM(hildon_program_get_instance());
g_set_application_name("I²C-Tiny-USB Demo");
/* Create HildonWindow and set it to HildonProgram */
window = HILDON_WINDOW(hildon_window_new());
hildon_program_add_window(program, window);
 
/************* main view **************/
gtk_container_add(GTK_CONTAINER(window),
GTK_WIDGET(vbox = gtk_vbox_new(FALSE, 0)));
 
/************* hardware initialization **************/
#ifndef NO_USB
usb_init();
usb_find_busses();
usb_find_devices();
 
for(bus = usb_get_busses(); bus; bus = bus->next) {
for(dev = bus->devices; dev; dev = dev->next) {
if((dev->descriptor.idVendor == I2C_TINY_USB_VID) &&
(dev->descriptor.idProduct == I2C_TINY_USB_PID)) {
char str[128];
sprintf(str, "\nI²C-Tiny-USB device on bus %s device %s",
bus->dirname, dev->filename);
gtk_box_pack_start(GTK_BOX(vbox), gtk_label_new(str), FALSE, FALSE, 0);
 
/* open device */
if(!(handle = usb_open(dev))) {
error("Cannot open the device: %s", usb_strerror());
exit(EIO);
}
break;
}
}
}
if(!handle) {
error("No i2c_tiny_usb device attached", NULL);
exit(ENODEV);
}
 
/* Get exclusive access to interface 0 */
ret = usb_claim_interface(handle, 0);
if (ret != 0) {
error("USB error: %s", usb_strerror());
exit(EPERM);
}
 
/* do some testing */
i2c_tiny_usb_get_func(vbox);
 
/* try to set i2c clock to 100kHz (10us), will actually result in ~50kHz */
/* since the software generated i2c clock isn't too exact. in fact setting */
/* it to 10us doesn't do anything at all since this already is the default */
i2c_tiny_usb_set(CMD_SET_DELAY, 10);
#else
gtk_box_pack_start(GTK_BOX(vbox), gtk_label_new("\nNO_USB option set"),
FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(vbox), gtk_label_new("No functions available\n"),
FALSE, FALSE, 0);
#endif
 
/************* create ds1621 frame **************/
 
gtk_container_add(GTK_CONTAINER(vbox),
GTK_WIDGET(ds1621Frame = gtk_frame_new(" ds1621 ")));
 
gtk_container_add(GTK_CONTAINER(ds1621Frame),
GTK_WIDGET(hbox = gtk_hbox_new(FALSE, 0)));
 
gtk_box_pack_start(GTK_BOX(hbox), gtk_label_new("Temperature:"),
FALSE, FALSE, 32);
 
gtk_box_pack_start(GTK_BOX(hbox), tempLabel = gtk_label_new("--- °C"),
FALSE, FALSE, 0);
 
#ifndef NO_USB
/* try to access ds1621 at address DS1621_ADDR */
if(usb_control_msg(handle, USB_CTRL_IN,
CMD_I2C_IO + CMD_I2C_BEGIN + CMD_I2C_END,
0, DS1621_ADDR, NULL, 0,
1000) < 0) {
error("USB error: %s", usb_strerror());
goto quit;
}
if(i2c_tiny_usb_get_status() == STATUS_ADDRESS_ACK) {
ds1621_present = 1;
 
/* activate one shot mode */
if(i2c_write_cmd_and_byte(DS1621_ADDR, 0xac, 0x01) < 0)
goto quit;
/* wait 10ms */
usleep(10000);
 
/* build an update timer for the temperature display */
temp_timer_src = g_timeout_source_new(1000);
g_source_set_callback(temp_timer_src, update_temperature, tempLabel, NULL);
g_source_attach (temp_timer_src, NULL);
g_source_unref(temp_timer_src);
} else
gtk_frame_set_label((GtkFrame*)ds1621Frame, " ds1621 - not found ");
#endif
 
/************* create pcf8574 frame **************/
 
/* create a frame for the pcf8574 elements */
gtk_container_add(GTK_CONTAINER(vbox),
GTK_WIDGET(pcf8574Frame = gtk_frame_new(" pcf8574 ")));
gtk_container_add(GTK_CONTAINER(pcf8574Frame),
GTK_WIDGET(hbox = gtk_hbox_new(FALSE, 0)));
 
gtk_box_pack_start(GTK_BOX(hbox), gtk_label_new("Output bits:"),
FALSE, FALSE, 32);
 
/* create a button box for the eight buttons */
gtk_box_pack_start(GTK_BOX(hbox), buttonBox = gtk_hbutton_box_new(),
FALSE, FALSE, 0);
 
gtk_button_box_set_child_size((GtkButtonBox*)buttonBox, 0, 0);
 
/* add the eight buttons */
for(i=0;i<8;i++) {
gtk_container_add(GTK_CONTAINER(buttonBox),
GTK_WIDGET(checkBits[i] = gtk_check_button_new()));
 
g_signal_connect(G_OBJECT(checkBits[i]), "clicked",
G_CALLBACK(button_clicked), checkBits);
}
 
#ifndef NO_USB
/* try to access pcf8574 at address PCF8574_ADDR */
if(usb_control_msg(handle, USB_CTRL_IN,
CMD_I2C_IO + CMD_I2C_BEGIN + CMD_I2C_END,
0, PCF8574_ADDR, NULL, 0,
1000) < 0) {
error("USB error: %s", usb_strerror());
goto quit;
}
if(i2c_tiny_usb_get_status() == STATUS_ADDRESS_ACK) {
pcf8574_present = 1;
i2c_write_byte(PCF8574_ADDR, 0x00); /* default value */
} else
gtk_frame_set_label((GtkFrame*)pcf8574Frame, " pcf8574 - not found ");
#endif
 
/*************************** *************************/
 
gtk_box_pack_start(GTK_BOX(vbox),
gtk_label_new("\nhttp://www.harbaum.org/till/i2c_tiny_usb\n"),
FALSE, FALSE, 0);
 
/* begin the main application */
gtk_widget_show_all(GTK_WIDGET(window));
/* Connect signal to X in the upper corner */
g_signal_connect(G_OBJECT(window), "delete_event",
G_CALLBACK(gtk_main_quit), NULL);
 
gtk_main();
 
quit:
ret = usb_release_interface(handle, 0);
if (ret)
error("USB error: %s\n", usb_strerror());
usb_close(handle);
return 0;
}
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/readme.txt
0,0 → 1,52
i2c-tiny-usb test application - http://www.harbaum.org/till/i2c_tiny_usb
------------------------------------------------------------------------
 
This simple test application is meant to demonstrate libusb
interfacing to the i2c-tiny-usb interface.
 
This is no useful application, if you are only interesting in
using the i2c-tiny-usb interface in your linux box please
use the kernel driver.
 
Linux
-----
 
required packages: libgtk2.0-dev
 
This demo application has been developed under and for linux. Just
make sure you have libusb installed. To use this program just
compile by typing "make" and run the resulting i2c_usb.
 
Be sure that the i2c-tiny-usb kernel driver is not loaded while
running the test application. Otherwise the test application will
fail with the follwing error message:
 
USB error: could not claim interface 0: Device or resource busy
 
This is due to the fact that no two drivers may access the interface
at the same time.
 
Windows
-------
 
This program can be compiled for windows. This has been tested
under Linux using xmingw and the windows port of libusb
(see http://libusb-win32.sourceforge.net). To install the
driver plug the device in and install the driver from
the win directory. Then run testapp/i2c_usb.exe
 
This program may also be compiled under windows using cygwin or
mingw (which is part of cygwin). In order to use cygwin simply
copy usb.h win32-linusb to /cygwin/usr/include and libusb.a to
/cygwin/lib and do a "make -f Makefile.cygwin". Don't forget to
distribute /cygwin/bin/cygwin1.dll with your file to allow it to
run in non-cygwin environments as well. No dll is required when using
mingw. In that case copy usb.h to /cygwin/usr/include/mingw and
libusb.a to /cygwin/lib/mingw. Finally do a "make -f Makefile.mingw".
 
MacOS X
-------
 
The program can be compiled under MacOS as well. The fink version
of linusb has to be installed and a simple "make -f Makefile.macos"
will build the native MacOS X version.
/Designs/Tools/i2c_AVR_USB/SW/testapp/mobile/readme.txt~
0,0 → 1,50
i2c-tiny-usb test application - http://www.harbaum.org/till/i2c_tiny_usb
------------------------------------------------------------------------
 
This simple test application is meant to demonstrate libusb
interfacing to the i2c-tiny-usb interface.
 
This is no useful application, if you are only interesting in
using the i2c-tiny-usb interface in your linux box please
use the kernel driver.
 
Linux
-----
 
This demo application has been developed under and for linux. Just
make sure you have libusb installed. To use this program just
compile by typing "make" and run the resulting i2c_usb.
 
Be sure that the i2c-tiny-usb kernel driver is not loaded while
running the test application. Otherwise the test application will
fail with the follwing error message:
 
USB error: could not claim interface 0: Device or resource busy
 
This is due to the fact that no two drivers may access the interface
at the same time.
 
Windows
-------
 
This program can be compiled for windows. This has been tested
under Linux using xmingw and the windows port of libusb
(see http://libusb-win32.sourceforge.net). To install the
driver plug the device in and install the driver from
the win directory. Then run testapp/i2c_usb.exe
 
This program may also be compiled under windows using cygwin or
mingw (which is part of cygwin). In order to use cygwin simply
copy usb.h win32-linusb to /cygwin/usr/include and libusb.a to
/cygwin/lib and do a "make -f Makefile.cygwin". Don't forget to
distribute /cygwin/bin/cygwin1.dll with your file to allow it to
run in non-cygwin environments as well. No dll is required when using
mingw. In that case copy usb.h to /cygwin/usr/include/mingw and
libusb.a to /cygwin/lib/mingw. Finally do a "make -f Makefile.mingw".
 
MacOS X
-------
 
The program can be compiled under MacOS as well. The fink version
of linusb has to be installed and a simple "make -f Makefile.macos"
will build the native MacOS X version.